Search Results

Controlled-release fertilizers (CRFs) provide an extended period of nutrient availability for turfgrass growth and may limit offsite nutrient losses compared with water-soluble fertilizers (WSFs). However, increasing temperatures and soil moisture accelerate nutrient release from many CRFs. As a result, turfgrass managers growing turfgrass in warm, humid climates with high rainfall question how effective CRFs are in reducing nutrient runoff losses while maintaining aesthetic quality. A study was conducted to examine the effect of three fertilizer treatments—an unfertilized control, a CRF applied at 87 lb/acre nitrogen (N), and a WSF applied at 87 lb/acre N as a split application (43.5 lb/acre N) at 0 and 45 d after initial fertilization (DAIF)—on nutrient losses from ‘Tifway’ hybrid bermudagrass (Cynodon dactylon × C. transvaalensis) during surface runoff events. Rainfall simulations were conducted 3, 28, 56, and 84 DAIF at an intensity of 3 inches per hour to induce 30 minutes of runoff. Water samples were analyzed for inorganic N and dissolved total phosphorus (DTP). Hybrid bermudagrass quality was similar among fertilizer treatments with CRF application, resulting in slightly higher quality. Across all fertilizer treatments, hybrid bermudagrass exhibited similar runoff initiation time and volumes within each rainfall simulation event. Nutrient losses from fertilized hybrid bermudagrass were greatest at the first runoff event at 3 DAIF, with WSF having the greatest losses. The subsequent application of WSF 45 DAIF did not result in greater N and DTP losses compared with CRF application, most likely a result of water incorporation applied to prevent wilting. Hybrid bermudagrass fertilized with a single application of CRF resulted in 23.6% and 55.6% reductions in cumulative inorganic N and DTP losses, respectively, compared with hybrid bermudagrass fertilized with the a split application of WSF.

Trinexapac-ethyl (TE) [4-(cyclopropyl-a-hydroxy-methylene)-3,5-dioxocyclohexanecarboxylic acid ethyl ester] effects on turfgrass root architecture are not known. It has been postulated that PGR application could cause photoassimilate that is normally used for shoot growth to be funneled to root growth. This study evaluated the effects of a single TE application on kentucky bluegrass (KBG) root and shoot growth for seven weeks. Individual KBG plants were grown in a hydroponic system and harvested weekly. At each harvest, tiller height, tiller number, and color ratings were recorded. Estimates of total root length (TRL), root surface area (SA), and average root diameter were measured using the WinRhizo system. Trinexapac-ethyl reduced plant height for 4 weeks followed by a period of postinhibition growth enhancement. Trinexapac-ethyl increased tiller number over the course of the study and slightly enhanced plant color. Trinexapac-ethyl reduced TRL and SA 48% and 46% at 1 week after treatment (WAT) followed by an accelerated growth rate 1 to 4 WAT. Trinexapac-ethyl had no effect on root diameter. On a tiller basis, TE initially reduced TRL and SA 30% and 31%, respectively. Total root length per tiller and root surface area per tiller were reduced by TE treatment, but by 7 WAT, those differences were no longer significant. Initial reductions in TRL and SA per tiller may reduce tiller competitiveness for water and nutrients. Based on data for TRL and SA per tiller, shoot and root growth must be considered in total to fully understand TE effects on plant growth. Field research is needed to corroborate results from hydroponic-studies and examine the effect of various TE rates and multiple applications on turfgrass root and shoot growth.

Many greenhouse growers rely on peat-based soilless substrates to produce salable crops in a relatively short period of time. Peat-based substrate suppliers often incorporate additional organic materials such as wood fiber to extend peat supplies. Given the relative success of wood-based substrates, growing interest in other fiber materials such as sugarcane bagasse may provide similar benefits for substrate processers. The objective of this research was to evaluate substrate properties and the productivity of a short-term floriculture crop, Osteospermum ‘Bright Lights Purple’, in a commercially available peat-based substrate (PL) that has been amended with either commercially available wood fiber [Hydrafiber (HF)] or an aged sugarcane bagasse fiber (SCB). Thus, substrates consisting of PL amended with 15% or 30% HF or SCB were developed. Plants were fertigated weekly at rates of 100, 200, or 300 ppm N, respectively. Crop growth and fertility dynamics were assessed. Substrate shrinkage was greatest in the 30% bagasse blend but had minimal impact given the 2-month crop cycle. The incorporation of 15% and 30% SCB and HF produced slight changes in pH over a 9-week growth period, with HF generally raising pH and SCB generally lowering pH compared with the 100% PL, showing promise for bagasse in managing substrate pH where irrigation water has high pH and/or alkalinity. Substrate EC was initially reduced by blending SCB and, to a lesser extent, HF, but differences ceased to exist by the end of the experiment. Chlorophyll and blooms were abundant in all substrates and fertigation rates. Regardless of fertigation rate, 30% HF had the lowest growth index and shoot dry mass, and 30% SCB had the lowest root dry mass, although differences were not visually apparent. Foliar N concentrations were greatest in plants grown in the PL and SCB substrates and lowest in HF blends. Overall, growth and dry mass differences were minimal across substrate treatment and fertigation rate, and all plants were marketable with statistically similar shelf life. In conclusion, this research indicates the potential of using SCB as a substrate amendment for short-term crop systems in a similar manner as wood fiber.

Mulching landscape beds is a common task for landscapers seeking to affect soil conditions and reduce weed pressure. This study investigated the effects of three pine (Pinus sp.) straw mulch depths (5, 10, and 15 cm) on soil moisture/temperature modulation during late winter/spring. No differences in soil volumetric water content were observed; however, increasing mulch depth to ≥10 cm decreased fluctuations in temperature. This research provides a better understanding of the effect of mulch depth and potential environmental benefits so that landscape contractors can determine cost-benefits of mulching applications.

Phosphorus (P) fertilizers with high water-solubility are often applied in excessive amounts to porous horticultural substrates to produce high-quality plants. As a result, high P losses during containerized plant production have presented an environmental challenge to responsible growers. Poultry litter ash (PLA), a byproduct of bioenergy production, contains P concentrations comparable to conventional P fertilizers but is characterized as having lower water-solubility. Therefore, a series of experiments were conducted to characterize effects of PLA on container-plant growth and P leaching. PLA was compared with superphosphate (SP), a highly water-soluble P source, in ratios of 0:100, 25:75, 50:50, 75:25, and 100:0 (SP:PLA) in the production of Lantana camara L. ‘New Gold’. In 2011, lantana fertilized with higher ratios of PLA exhibited slower growth with lower shoot and root biomasses compared with 100% SP-fertilized lantana. However, in 2012, differences in fertilizer treatments lessened, with 100% PLA-fertilized lantana exhibiting 14% less shoot biomass and no differences in root biomass compared with 100% SP-fertilized lantana. Measurement of shoot:root biomass, a common indicator of P deficiency, was not different between any P treatments in 2011 or 2012. This indicates root growth was most likely the driving factor in P-treatment effects on shoot biomass in each year of the experiment. During a postproduction field trial, no differences in growth or biomass were observed between lantana previously fertilized with P, regardless of source. However, application of PLA as the single P source reduced dissolved reactive P (DRP) concentrations in leachate >90% and total P (TP) mass losses 69% compared with 100% SP-fertilized lantana during container production, with P treatments reducing DRP and TP losses as PLA ratios increased. Therefore, the benefit of P-loss reduction during container production achieved through PLA application may warrant the acceptance of slightly smaller plants or extending production cycles.

As turfgrass quality of seeded bermudagrass (SB) [Cynodon dactylon (L.) Pers.] cultivars has increased over the past 20 years, so has their use. Improved SB cultivars offer ease of establishment and convenience of storage while providing an economic advantage over vegetative propagation. Currently, most improved seeded cultivars are marketed with a seedcoating unique to each seed company. However, germination of some of the new cultivars is not ideal. The objectives of this study were to determine commercial coating effects on germination, compare germination among cultivars, and evaluate the effect of temperature on germination of five bermudagrass cultivars. ‘Princess-77’, ‘Riviera’, ‘Transcontinental’, and ‘Yukon’ were selected for a series of 21-day germination studies with ‘Arizona Common’ included as a standard cultivar. The study compared two seed lots of coated and uncoated samples of the five cultivars for germination response to six temperature regimes. Cumulative count intervals occurred on Day 7, Day 14, and Day 21. Overall, commercial seedcoating did not significantly affect SB germination. However, both temperature regime and cultivar were significant factors. Germination percentage was greatest with either the 35/25 °C or the 30/20 °C temperature regimes. ‘Riviera’ exhibited the lowest overall germination, whereas ‘Transcontinental’ and ‘Arizona Common’ exhibited the highest.