Search Results

You are looking at 1 - 3 of 3 items for

  • Author or Editor: Gwen Hoheisel x
  • Refine by Access: All x
Clear All Modify Search
Free access

Julie M. Tarara and Gwen-Alyn Hoheisel

The importance of shielding temperature sensors from solar radiation is understood, but there is a lack of prescriptive advice for plant scientists to build inexpensive and effective shields for replicated field experiments. Using the general physical principles that govern radiation shielding, a number of low-cost, passively ventilated radiation shields built in-house was assessed for the measurement of air temperature against the same type of sensor in a meteorological “standard” Gill radiation shield. The base shield material had high albedo (≈0.9) and low emissivity (0.03). Aspirated shields were included for simultaneous measurements of temperature and relative humidity. Differences in air temperature (ΔT) between low-cost shields and the standard Gill were greatest for shields with open bottoms (up to +7.4 °C) and for those with poorly perforated sidewalls. Open-bottomed shields were prone to heating from reflected radiation. Tube-shaped shields appeared to require more than 30% sidewall perforation for convection by ambient wind (up to 4 m·s−1) to offset the midday radiation load of the shield. The smallest daytime ΔT were between aspirated shields and the standard Gill, averaging less than ±0.5 °C. Among passively ventilated shields, the smallest daytime ΔT consistently were produced by a shield that emulated the stacked plate design of the standard Gill for a total of U.S. $4.00 in materials and 45 min construction time. Eighty-nine percent of all daytime ΔT for the “homemade Gill” shield was 1.5 °C or less. The combination of low ambient wind speed (less than 1 m·s−1) and high global irradiance (greater than 600 W·m−2) produced the largest ΔT for all passively ventilated shields, the magnitude of which varied with shield design; stacked plate configurations were more effective shields than were tube-based configurations. Nighttime ΔT were inconsequential for all shields. Cost-effective radiation shielding can be achieved by selecting shield materials and a configuration that minimize daytime radiation loading on the shield while maximizing the potential for convective transfer of that radiation load away from the shield and the sensor it houses.

Full access

Shannon Caplan, Bryan Tilt, Gwen Hoheisel, and Tara A. Baugher

Increasing labor costs and changes in labor forces have prompted an increased demand for automation in specialty crop production. Implementation of technological innovations in the agricultural sector tends to be slow, thus this study investigated motivations and perceptions of technology. Using qualitative interviewing and analysis, this study used a diffusion of innovations framework to gain insight into what channels of communications impacted planned adoption rates and what aspects of technology influence the decision-making process. Interview participants emphasized the inevitability of implementing new technologies while considering the capital investment of more complex technology, changes in labor management to integrate technology, applicability of technology to current practices, and trust in technology designers.

Open access

Amit Bhasin, Joan Davenport, Scott Lukas, Qianwen Lu, Gwen Hoheisel, and Lisa W. DeVetter

Bloom to fruit maturity is a period of rapid growth and nitrogen (N) uptake in northern highbush blueberry (Vaccinium corymbosum L.). Sufficient plant-available N is critical during this time, and growers often accomplish this through fertilizer applications from bloom through fruit development. For organic production in northern climates like Washington State, postharvest applications of N fertilizer are not recommended for northern highbush blueberry because they may stimulate excessive vegetative growth, reduce floral bud set, and increase the risk of winter injury through delayed acclimation. However, early fruiting cultivars with the potential for an extended growing season after harvest may benefit from postharvest N applications because the additional N may promote shoot and root growth that could support fruit production in future years while still allowing plants to form floral buds and acclimate to winter temperatures. The objective of this study was to evaluate the potential impacts of postharvest organic N fertilizer applications on ‘Duke’, an early fruiting northern highbush blueberry cultivar. Specific objectives were to determine the effects of postharvest organic N fertilizer application on plant growth, yield, floral bud set, fruit quality, cold hardiness, tissue macronutrient concentrations, and select soil properties. Four treatments varying in the timing of N application were evaluated in a commercial ‘Duke’ field in eastern Washington using a single fertilizer rate of 130 kg⋅ha−1 N from 2018 to 2020. The organic fertilizer N source was a liquid fertilizer derived from digested plant materials. The experimental design was a randomized complete block design with four replications and treatments included the following: control (100% of N applied preharvest); 80/20 (80% preharvest, 20% postharvest); 70/30 (70% preharvest, 30% postharvest); and 60/40 (60% preharvest, 40% postharvest). Although the year influenced measured variables, including yield, floral bud set, fruit quality, tissue nutrients, and soil properties, few treatment effects were observed across the 3-year study. Cold hardiness was only impacted once (8 Feb. 2020), and floral buds were overall hardy to extreme minimum winter temperatures for the region. This project showed that applying postharvest organic N as a liquid fertilizer had no negative consequences on productivity metrics for an early fruiting blueberry cultivar grown in a region with an extended growing season, thus providing growers with more flexibility when timing their fertilizer applications. Results may differ for other fertilizer sources, and further monitoring of soil NO3-N accumulation should be conducted to gain a better understanding of its dynamics and the potential for risks.