-to-use yet inexpensive tool to estimate horticultural crop water requirements. This paper describes concepts and design of two different Water Wheel calculators in enough detail that nonspecialists might develop their own calculators using local climatic data
Brent Rowell and Mar Lar Soe
David R. Bryla and Bernadine C. Strik
( Caruso and Ramsdell, 1995 ; de Silva et al., 1999 ). Typically, 25 to 50 mm of water per week is recommended for blueberry ( Strik et al., 1993 ), although actual water requirements will likely vary not only with the environmental conditions, but also
David R. Bryla, Jim L. Gartung, and Bernadine C. Strik
computing crop water requirements. FAO Irrigation and Drainage Paper 56 Food and Agriculture Organization of the United Nations Rome, Italy Bryla, D.R. Linderman, R.G. 2007 Implications of irrigation method and amount of water application on Phytophthora
L.R. Costello, N.P. Matheny, and J.R. Clark
Since it is unlikely that crop coefficients will be established for landscape plantings, a method to estimate landscape water requirements is proposed. By evaluating three factors that significantly influence water use-species planted, vegetation density, and site microclimate-and assigning numerical values to each, an estimate of a landscape crop coefficient (or landscape coefficient, KL) can be calculated. An estimate of evapotranspirational water loss for landscapes is then the product of the landscape coefficient multiplied by the reference evapotranspiration. This paper presents values for the above three factors and discusses the rationale for each. Examples using the landscape coefficient formula are included, as well as a discussion of special considerations relative to its use.
Susmitha Nambuthiri, Ethan Hagen, Amy Fulcher, and Robert Geneve
Nambuthiri, S. Hagen, E. Fulcher, A. Geneve, R. 2015b Evaluating a physiological-based, on-demand irrigation system for container-grown woody plants with different water requirements HortScience 50 S383 Nemali, K.S. van Iersel, M.W. 2006 An automated system
C.D. Stanley and B.K. Harbaugh
Methodology was developed to estimate water requirements for production of 20 different potted ornamental plant species with practical application for water conservation in commercial operations. Water requirement prediction equations were generated using pan evaporation to estimate evaporative demand along with plant canopy height and width and flower height as input variables. Coefficients of determination (R2) for the prediction equations among plant species ranged from 0.51 to 0.91, with the lower values mostly associated with plant species with an open or less-uniform growth habit. Variation in water use among different cultivars of marigold also was associated with differences in cultivar growth habit. Estimation of the daily water requirements of potted Reiger begonia and Ficus benjamina using their developed prediction equations was compared to actual water use under common growing conditions to demonstrate the implementation of the method for plant species differing in growth habit.
Jinmin Fu, Jack Fry, and Bingru Huang
Water requirements for `Meyer' zoysiagrass (Zoysia japonica Steud., hereafter referred to as zoysia), `Midlawn' bermudagrass [Cynodon dactylon (L.) Pers. × C. transvaalensis Burtt-Davy, hereafter referred to as bermuda], `Falcon II' tall fescue (Festuca arundinacea Schreb.) and `Brilliant' kentucky bluegrass (Poa pratensis L., hereafter referred to as bluegrass) were evaluated under a mobile rainout shelter at deficit irrigation levels of 20% to 100% of actual evapotranspiration (ETa), applied twice weekly, between June and September 2001 and 2002. Soil was a river-deposited silt loam (fine, montmorillonitic, mesic Aquic Arquidolls). Minimum annual irrigation amounts required to maintain quality ranged from 244 mm for bermuda to 552 mm for bluegrass. Turfgrass species and respective irrigation levels (% of ETa) at which season-long acceptable turf quality was maintained in each year were bluegrass, 100% (evaluated 2001 only); tall fescue, 60% in 2001 and 80% in 2002; bermuda, 60% in both years; and zoysia, 80% in both years. A landscape manager who could tolerate one week of less-than-acceptable quality could have irrigated tall fescue at 40% ETa (224 mm) in 2001 and 60% ETa (359 mm) in 2002. Likewise, bermuda exhibited unacceptable quality on only one September rating date when irrigated at 40% ETa (163 mm) in 2001. Bermuda was able to tolerate a lower leaf relative water content (LRWC) and higher level of leaf electrolyte leakage (EL) compared to other grasses before quality declined to an unacceptable level.
D.R. Pittenger, Donald R. Hodel, and David A. Shaw
Non-turf ground-covers occupy a significant portion of the landscape, and understanding their water requirements is important when water conservationism being practiced. Six groundcover species (Baccharis pilularis `Twin Peaks', Drosanthemum hispidum, Vinca major Gazania hybrid, Potentilla tabernaemontani and Hedera helix `Needlepoint') representing a range of observed water needs were evaluated under different levels of irrigation based on percentages of real-time reference evapotranspiration.
Treatments of 100%, 75%, 50% and 25% of ETO were applied during 1989 while treatments of 50%, 40%, 30% and 20% of ETO were applied during 1990. Plant performance ratings in the first year indicated that 50% of ETO was the minimum treatment which resulted in acceptable plan aesthetics for all species except for Drosanthemum which performed equally well at each treatment. Significant differences in performance did occur among and within species at the different treatments. Results from 1990 will reveal which species might maintain aesthetic appearance at irrigation levels between 50% and 20% of ETO. These results will be presented and discussed in terms of their significance to species selection and total landscape irrigation management.
Thayne Montague* and Lindsey Fox
Recent droughts and depleted water tables across many regions have elevated the necessity to irrigate field-grown (FG) nursery trees. At the same time, ordinances restricting nursery irrigation volume have been implemented, often without regard to plant water requirements. This research investigated growth of seven FG tree species (Acer buergeranum, A. campestre, A. × freemanii `Autumn Blaze', A. truncatum, Quecus muehlenbergii, Q. polymorpha, and Q. robur) subjected to three reference evapotranspiration (ETo) irrigation regimes (100%, 60%, and 30% ETo) in a semi-arid climate. During Spring 2002, nine containerized (11.3 L) trees of each species were field planted in a randomized block design. Each year trees were irrigated through a drip irrigation system. During the first growing season, all trees were irrigated at 100% ETo. Irrigation treatments began Spring 2003. Growth data (shoot elongation and caliper increase) were collected at the end of the 2003 growing season. Species growth data were subjected to analysis of variance. If treatment differences were found, means were separated by Fisher's least significant difference. Shoot growth was influenced by irrigation regime for each species except A. campestre and Q. robur. For each of the five remaining species, the greatest shoot growth increase was generally not associated with the greatest irrigation regime. In a similar manner, caliper increase was influenced by irrigation regime for each species. The 100% ETo irrigation regime produced the greatest caliper increase for A. buergeranum, A. truncatum, Q. polymorpha, and Q. robur. For remaining species, the greatest caliper increase was generally not associated with the greatest irrigation regime.
C. D. Stanley, G. A. Clark, E. E. Albregts, and F. S Zazueta
Sixteen field-located drainage lysimeters (each 60 cm wide, 2.44 m long, 60 cm deep) designed specifically for determination of water requirements for fruiting strawberry production (season - Oct to April) were installed in 1986. Each lysimeter was equipped with individual micro-irrigation and drainage collection systems automated for minimal management input. Initially, computer control (using a low-cost microcomputer) was used to continuously check switching-tensiometers located in each lysimeter and apply irrigation water as needed, A drainage suction (-10 MPa) was applied continuously to simulate field drainage conditions. Manually-installed lysimeter covers were used to protect the plots from interference from rainfall when needed, Initial irrigation application treatments were set at four levels of soil moisture tension controlled by tensiometers and were measured using flow meters for each lysimeter. This paper will discuss problems that were experienced with the initial setup (difficulty in measuring actual application amounts, tensiometer and computer control, elimination of rainfall interference, uniformity of irrigation application, and salinity in the rooting zone) and the modifications (pressurized reservoir tanks, construction of motorized rain-out shelter, micro-irrigation emitters used, and fertilization program) which have been made to overcome them,