Height regulation is crucial in poinsettia (Euphorbia pulcherrima) production for both aesthetics and postharvest handling. Controlled water deficit (WD) offers a potential alternative to plant growth retardants (PGRs) for poinsettia height regulation. We have previously shown that WD can be used to regulate poinsettia stem elongation. However, it is not clear how WD can be used to achieve different plant heights and how it affects aesthetic qualities such as bract size. Our objectives were to determine whether a range of plant heights can be achieved using controlled WD and to investigate possible adverse effects of WD on shoot morphology. Rooted cuttings of poinsettia ‘Classic Red’ were transplanted into 15-cm pots filled with 80% peat:20% perlite (v/v) substrate. Three target heights (43.2, 39.4, and 35.6 cm) were set at pinching (Day 27) and height tracking curves were used to monitor plants throughout the production cycle (77 days from pinching to finish). Substrate volumetric water content (θ) was maintained at 0.40 m3·m−3 (a matric potential of ≈–5 kPa) during well-watered conditions and reduced to 0.20 m3·m−3 (≈–75 kPa) when plants were taller than desired based on the height tracking curves. Control plants were maintained at a θ of 0.40 m3·m−3 throughout the study and had a final height of 51.2 cm. Plants with the 35.6-cm target height exceeded the upper limits of the height tracking curve despite being kept at a θ of 0.20 m3·m−3 for 70 days and had a final height of 39.8 cm. The final plant heights in the 39.4- and 43.2-cm target height treatments were 41.3 and 43.5 cm, respectively, within the 2.5-cm margin of error of their respective target heights. Relative to control plants, bract area was reduced by 53%, 47%, and 31% in the 35.6-, 39.4-, and 43.2-cm target height treatments, respectively. Our results indicate that WD can be an effective method of height control, but WD may also decrease bract size.
Peter Alem, Paul A. Thomas, and Marc W. van Iersel
Peter Alem, Paul A. Thomas, and Marc W. van Iersel
Production of poinsettias (Euphorbia pulcherrima) often involves intensive use of plant growth retardants (PGRs) to regulate height. Height control is necessary for visual appeal and postharvest handling. Since PGRs do not always provide consistent height control and can have unwanted side effects, there is interest in alternative methods of height control. Since turgor potential drives cell expansion, and thus stem elongation, drought stress has potential for regulating plant height. Through soil moisture sensor-controlled irrigation, the severity of drought stress can be both monitored and controlled. The objective of our study was to compare poinsettia ‘Classic Red’ height control using PGRs (spray, mixture of daminozide and chlormequat at 1000 mg·L−1 each and drench, 0.25 mg·L−1 paclobutrazol) with the use of controlled water deficit (WD). Graphical tracking of plant height, using a final target height of 43.5 cm, was used to determine when to apply PGR or controlled WD. In the WD treatment, substrate volumetric water content (θ) was reduced from 0.40 to 0.20 m3·m−3 when actual height exceeded the expected height. PGR applications (spray or drench) reduced poinsettia height to 39 cm, below the final target level of 43.5 cm. WD resulted in a height of 44.5 cm, closest to the target height, while control plants were taller (49.4 cm). There was no effect of PGR drenches or WD on bract size, while spraying PGR reduced bract size by ≈ 40%. Bract chroma was unaffected by WD or PGR treatments. There was no difference in shoot dry weight between PGR- and WD-treated plants. Lateral growth was reduced by the PGR treatments, but not by WD. These results indicate that controlled WD can be used to regulate poinsettia height.
Thomas G. Ranney, Thomas A. Eaker, Paul R. Fantz, and Clifford R. Parks
Franklinia alatamaha Bartr. ex Marshall represents a monotypic genus that was originally discovered in Georgia, but is now considered extinct in the wild and is maintained only in cultivation. Although Franklinia is very ornamental, with showy flowers and crimson/maroon fall foliage color, it tends to be short lived when grown as a landscape tree and is known to be susceptible to a variety of root pathogens. Schima argentea Pritz is an evergreen tree that is native to Asia and is valued for its glossy foliage, late-summer flowers, and broad adaptability in mild climates. Hybridization between these genera could potentially combine the cold hardiness and desirable ornamental characteristics of F. alatamaha with the greater adaptability, utility, and genetic diversity of S. argentea. Controlled crosses between F. alatamaha and S. argentea resulted in new intergeneric hybrid progeny. A morphological comparison of parents and the progeny is presented. ×Schimlinia floribunda Ranney and Fantz (mountain schimlinia) is proposed as the name for these hybrids and is validated with a Latin diagnosis.
Kaylee A. South, Paul A. Thomas, Marc W. van Iersel, Cindy Young, and Michelle L. Jones
Phalaenopsis orchids are an increasingly popular potted house plant in the United States. New cultivars have a long display life in home environments, but these epiphytes are often overirrigated by consumers. Irrigating potted Phalaenopsis orchids weekly with ice cubes has been recommended as a simple solution to help consumers, but concern has been raised about whether the ice cubes will cause low temperature damage in these tropical plants. The effect of ice cube irrigation on the display life and quality of four cultivars of potted Phalaenopsis orchids was, therefore, evaluated. Irrigation treatments included weekly application of three ice cubes or the equivalent volume of room-temperature tap water. The longevity of individual flowers and the overall display life of the orchid plants were determined. Monthly measurements determined the volume of leachate in the outer decorative pots after irrigation. The quantum yield of photosystem II (ΦPSII) in roots and leaves was evaluated monthly to determine if photosynthetic efficiency was affected by the ice irrigation. The temperature in the orchid bark growing media during irrigation events was recorded, and a programmable antifreeze bath was used to determine the temperature at which damage to PSII was observed in orchid roots. The flower longevity and display life were unaffected by irrigation treatment. In general, the leachate volume over time was the same or lower in ice irrigated orchids compared with those irrigated with the same volume of water. The lowest temperature in the bark media irrigated with ice cubes was ≈11 °C, while controlled freezing experiments showed that damage to photosystem II in orchid roots did not occur until bath temperatures were below −7 °C. The internal temperature of roots in direct contact with ice cubes decreased to around 4 °C. Ice cube irrigation had no detrimental effects on the quality or display life of potted Phalaenopsis orchids growing in bark, demonstrating that ice cubes are a viable method of irrigating these tropical house plants.
Rhuanito S. Ferrarezi, Stuart A. Weiss, Thomas C. Geiger, and K. Paul Beamer
Snow pea (Pisum sativum var. saccharatum) and sugar snap pea (P. sativum var. macrocarpon) are high-value crops typically grown in temperate regions. Temperature is the main limiting factor to growing edible-pod peas in warmer U.S. states and territories. The objective was to evaluate edible-pod peas performance in tropical climates and to make cultivar recommendations to farmers in the U.S. Virgin Islands based on fruit yield. Trials were performed in two consecutive years (2014 and 2015), testing six cultivars of edible-pod peas: three snow pea (Little Sweetie, Mammoth Melting, and Oregon Giant) and three sugar snap pea (Super Sugar Snap, Cascadia, and Sugar Sprint) in a complete randomized block with four replications. ‘Little Sweetie’ produced the highest total fruit yield for the season (15,442 kg·ha−1) and ‘Mammoth Melting’ (4249 kg·ha−1) and ‘Sugar Sprint’ (3349 kg·ha−1) produced the lowest total fruit yield in Year 1. The same trend happened in Year 2, where ‘Little Sweetie’ (14,322 kg·ha−1) and ‘Super Sugar Snap’ (12,511 kg·ha−1) were higher yielding and ‘Mammoth Melting’ (4582 kg·ha−1) and ‘Sugar Sprint’ (1929 kg·ha−1) were the lowest yielding cultivars. ‘Mammoth Melting’ showed a marketable yield below 80% of total yield in Years 1 and 2. ‘Mammoth Melting’ and ‘Super Sugar Snap’ produced the tallest plants in Year 1, while ‘Mammoth Melting’ was significantly taller than the others in Year 2. As expected, sugar snap pea presented fruit soluble solids concentration (SSC) 2.7% to 6.5% higher than snow pea. The snow pea cultivars had longer mean fruit length (81 to 86 mm) than sugar snap pea (60 to 68 mm). The opposite trend occurred with fruit thickness; sugar snap pea averaged 28.5% thicker than snow pea. The shoot dry weight of ‘Sugar Sprint’ was on average 78.5% smaller than ‘Mammoth Melting’ and ‘Oregon Giant’, resulting in poor performance due to small plant size. ‘Mammoth Melting’ and ‘Super Sugar Snap’ had the lowest chlorophyll content compared with the other cultivars. Results of this experiment indicate that edible-pod peas have potential as a specialty, short-season, high-value crop when grown in the cool–dry winter months of the U.S. Virgin Islands. Of the cultivars tested, Little Sweetie was the highest yielding cultivar evaluated within the environmental and geographical conditions of this study for two consecutive years.
Matthew Chappell, Sue K. Dove, Marc W. van Iersel, Paul A. Thomas, and John Ruter
Water quality and quantity are increasingly important concerns for agricultural producers and have been recognized by governmental and nongovernmental agencies as focus areas for future regulatory efforts. In horticultural systems, and especially container production of ornamentals, irrigation management is challenging. This is primarily due to the limited volume of water available to container-grown plants after an irrigation event and the resultant need to frequently irrigate to maintain adequate soil moisture levels without causing excessive leaching. To prevent moisture stress, irrigation of container plants is often excessive, resulting in leaching and runoff of water and nutrients applied to the container substrate. For this reason, improving the application efficiency of irrigation is necessary and critical to the long-term sustainability of the commercial nursery industry. The use of soil moisture sensing technology is one method of increasing irrigation efficiency, with the on-farm studies described in this article focusing on the use of capacitance-based soil moisture sensors to both monitor and control irrigation events. Since on-farm testing of these wireless sensor networks (WSNs) to monitor and control irrigation scheduling began in 2010, WSNs have been deployed in a diverse assortment of commercial horticulture operations. In deploying these WSNs, a variety of challenges and successes have been observed. Overcoming specific challenges has fostered improved software and hardware development as well as improved grower confidence in WSNs. Additionally, growers are using WSNs in a variety of ways to fit specific needs, resulting in multiple commercial applications. Some growers use WSNs as fully functional irrigation controllers. Other growers use components of WSNs, specifically the web-based graphical user interface (GUI), to monitor grower-controlled irrigation schedules.
Mary Lewis, Matthew Chappell, Paul A. Thomas, Rebekah C. Maynard, and Ockert Greyvenstein
Milkweed (Asclepias sp.) is an important pollinator genus across North America and is a host plant for many butterfly species, notably the monarch butterfly (Danaus plexippus). Commercial production of Asclepias is limited to a few species, because most species lack commercial traits, with minimal branching habit, excessive height, and minimal color variation. This study used a commercially viable Asclepias species, butterfly weed (Asclepias tuberosa L.), as a maternal parent and trialed three different pollination methods in an attempt to create interspecific hybrids. Pollination methods included a traditional method, a pollen–solution-based method, and a novel inverted pollinia method. The inverted pollinia method increased pollination success rates 4-fold among intraspecific crosses of A. tuberosa. When pollination methods were optimized, A. tuberosa was used as the maternal parent, and one-way crosses were made to seven other Asclepias species using the inverted pollinia method. Of the seven species used as pollen donors, four developed hybrid seed successfully: green milkweed (Asclepias hirtella Woodson), purple milkweed (Asclepias purpurascens L.), showy milkweed (Asclepias speciosa Torr.), and common milkweed (Asclepias syriaca L.). As germination methods vary significantly among Asclepias species, three methods of germination were trialed on seed developed via interspecific hybridizations: direct seeded, cold–moist stratification, and embryo rescue. Of the three methods, cold–moist stratification was superior to direct seeding and embryo rescue. This research is the first documented case of a controlled interspecific hybridization event among these species.
Stephanie E. Burnett, Svoboda V. Pennisi, Paul A. Thomas, and Marc W. van Iersel
Polyethylene glycol 8000 (PEG-8000) was applied to a soilless growing medium at the concentrations of 0, 15, 20, 30, 42, or 50 g·L-1 to impose controlled drought. Salvia (Salvia splendens F. Sellow. ex Roem & Shult.) seeds were planted in the growing medium to determine if controlled drought affects morphology and anatomy of salvia. Polyethylene glycol decreased emergence percentage and delayed emergence up to 5 days. Stem elongation of salvia treated with the five lowest concentrations was reduced up to 35% (21 days after seeding), and salvia were a maximum of 53% shorter and the canopy was 20% more narrow compared to nontreated seedlings 70 days after seeding. These morphological changes were attributed to PEG-8000 mediated reduction in leaf water potential (Ψw). The growing medium Ψw ranged from -0.29 to -0.85 MPa in PEG-8000 treated plants, and plant height was positively correlated with Ψw 21 days after seeding. Stem diameter of PEG-treated seedlings was reduced up to 0.4 mm mainly due to reductions in vascular cross-sectional area. Xylem cross-sectional area decreased more than stem and phloem cross-sectional area. Polyethylene glycol 8000 reduced vessel element number, but not diameter.
Shea A. Keene, Timothy S. Johnson, Cindy L. Sigler, Terah N. Kalk, Paul Genho, and Thomas A. Colquhoun
For the past century, daylily (Hemerocallis) hybridization focused almost exclusively on enhancing the diversity of flower forms, colors, and color patterns. This focus on the visual characteristics of daylilies resulted in the development of thousands of hybrids that come in a fantastic array of colors and color patterns. However, these modern daylilies exhibit little to none of the floral fragrance possessed by some of the daylily progenitor species. Because little work has been done on daylily floral volatiles, the objective of this research was to evaluate the floral volatile profiles of a variety of daylily species and hybrids and assess the state of fragrance among modern hybrids. Using a field collection system and gas chromatography–mass spectrometry (GS-MS), this study evaluated the fragrance profiles of 147 daylily genotypes. Eighteen volatile organic compounds, primarily terpenoids, were identified and their variations among the genotypes were investigated. Results suggest that fragrance could be a trait pursued in a breeding program to enhance the sensory phenotypes of new daylily cultivars.
Heidi C. Wernett, Thomas J. Sheehan, Gary J. Wilfret, Francis J. Marousky, Paul M. Lyrene, and David A. Knauft
A broad source of Gerbera × hybrida Hort. germplasm was evaluated for vase life. Senescence mode, i.e., bending or folding of stems or wilting of ligulae was also recorded for flowers evaluated. Intensive selection was practiced to improve vase life. About 10% of the plants from a sample population were selected for having flowers with high vase life. Progeny means for vase life resulting from a topcross between these plants and `Appleblossom' were used to select five plants (about 1.5% of the sample population) whose flowers had high vase life. A diallel cross using these five plants as parents resulted in a progeny population with an increase in mean vase life of 3.4 days compared to mean vase life for the initial sample population. Increases in vase life means for days to bending, folding, and wilting were 0.3, 3.5, and 1.2 days, respectively. Plants with flowers which senesced due to wilting had the longest mean vase life before and after breeding. Changes in proportion of senescence modes were observed; bending decreased, folding and wilting increased. Frequencies of bending, folding, and wilting were compared to vase life means for 10 progenies. Proportion of bending generally decreased as vase life increased.