PE mulch has been used in agriculture for 60 years, and is considered effective and affordable; however, its use leads to waste and pollution. In 2011, PE mulch was used on nearly 20 million hectares in China with its use projected to grow 7% or more annually, whereas in 2012, an estimated 98,300 tons of PE mulch was used in North America (Liu et al., 2014; Markets and Markets, 2012). Whereas PE mulch controls weeds, conserves soil moisture, and increases overall crop yield and quality (Cowan et al., 2014), this technology contributes to environmental pollution (Liu et al., 2014). Most PE mulch is removed from the field and disposed of in landfills, buried or burned on-site, or dumped in streams, rivers, or the ocean because used PE mulch is contaminated with soil and crop debris (up to 50% by weight) and not readily recyclable (Kasirajan and Ngouajio, 2012). Residual PE mulch is left in the field [estimated 5% to 10% (L. Martin-Closas, personal communication)], where it negatively impacts soil structure, water quality, and crop growth, and can enter water systems, thereby disrupting the agricultural ecosystem and overall environment (Steinmetz et al., 2016). It is worth noting that over 80% of the plastic waste found in oceans originates from disposal on land (Li et al., 2016).
Biodegradable plastics are degradable plastic in which the degradation results from the action of naturally occurring microorganisms such as bacteria, fungi, and algae (ASTM International, 2011). Biodegradable plastic offers a potential solution to some of the issues associated with PE mulch; however, BDM users are concerned about the extent and rate of mulch biodegradation in the field after soil incorporation and impacts on soil health and the productivity of subsequent crops (Goldberger et al., 2015; Miles et al., 2009; Yamamoto-Tamura et al., 2015). Many studies have evaluated crop yield with BDM as well as mulch functionality and deterioration (loss of physical or mechanical strength, as observed through physical strength testing, microscopic imaging, or sizable macroscopic alteration of morphology) during the growing season (Anzalone et al., 2010; Cowan et al., 2014; Jenni et al., 2007; Kasirajan and Ngouajio, 2012; Li et al., 2014; Miles et al., 2012; Moreno et al., 2009; Ngouajio et al., 2008; Waterer, 2010; Wortman et al., 2016). Deterioration of BDM aboveground is driven by temperature, sunlight, moisture, mechanical stresses, and their interactions, and can affect biodegradation, which primarily occurs belowground (Hablot et al., 2014; Kijchavengkul et al., 2008; Lucas et al., 2008; Singh and Sharma, 2008). Biodegradation is the disintegration of materials by microorganisms or other biological means, producing carbon dioxide (CO2) or methane (CH4), water, and microbial biomass (Kyrikou and Briassoulis, 2007). In the field, the extent of biodegradation of soil-incorporated BDM can be assessed by the presence of visible mulch fragments in soil samples. This does not directly measure the degree of biodegradation, but does provide an estimation of the initial stage of mulch biodegradation.
Currently, there is no established field method to measure the amount of BDM remaining in the soil after incorporation, and the few studies that have attempted to make assessments have used somewhat similar methods. Calmon et al. (1999) buried a known surface area (5 × 20 cm) and mass of 19 films made from polyhydrobutyrate hydroxyvalerate, polycaprolactone (PCL), PCL-starch, poly (lactic acid) (PLA), starch-PLA, cellophane, protein, PE, PE-starch, and paper, where each material represented a different level of biodegradability. Each sample was placed in a PE mesh (0.5 × 0.5 cm) bag, and samples were placed in the soil at five different depths (0–20 cm) at a 45° angle to enhance water drainage. Biodegradation was determined by measuring the mass of recovered samples (after cleaning) and the area (image analysis, method not specified) at 4, 8, 12, 16, 20, and 24 months after burial. Results indicated that the mass of PLA films in some samples increased up to 160% after 20 months because of high adherence of soil particles and mycelium on fragments even after cleaning, whereas image analysis of these same samples showed that the surface area decreased. The authors concluded that image analysis was more robust compared with mass measurements for assessing biodegradation in the field. Although this study included a positive control treatment (PE), the mulches were not exposed to field conditions within a cropping system before burial, nor were they incorporated into the soil using typical tillage practices as they would when used on a farm.
Li et al. (2014) also used mesh bags to evaluate biodegradation of four BDMs in three climatically distinct locations of the United States (Knoxville, TN; Lubbock, TX; Mount Vernon, WA) by measuring loss of mulch surface area. At all three locations, the authors found that after 24 months of burial, there was no decrease in the surface area of spunbond PLA [experimental nonwoven PLA (feedstock from NatureWorks, Blair, NE)], and the average surface area loss of two commercial BDMs [BioAgri (BioBag Americas, Palm Harbor, FL) and BioTelo Agri (Dubois Agrinovation, Waterford, ON, Canada)] was 52% at Knoxville, 98% at Lubbock, and 6% at Mount Vernon. The biodegradability of the BDMs at all sites may have been reduced by the lack of subsequent soil tillage and the protection provided by the mesh bags. To address these two issues, Cowan et al. (2013) tilled three BDMs into the soil following a broccoli (Brassica oleracea var. italica) crop at Mount Vernon, WA, and 13 months after incorporation, randomly sampled the soil to a 6-inch depth with a large soil core (golf hole cutter, 4 inches diameter). The authors bulked three soil samples per plot, and extracted the mulch through a wet sieve (1.18 mm) process. Mulch fragments were placed on a glass plate, photographed (EOS Digital Rebel XT; Canon USA, Lake Success, NY), and the surface area was calculated using image-processing software (ImageJ; National Institutes of Health, Bethesda, MD) (Rasband, 1997). The authors calculated percent loss of surface area relative to that of the total soil sample, and found that surface area of spunbond PLA did not decrease whereas surface area of BioAgri mulch had decreased 60%, and no fragments of Crown 1 mulch [currently marketed as Naturecycle (Custom Bioplastics, Burlington, WA)] were found. In a similar study, Wortman et al. (2016) grew cucumber (Cucumis sativus) on four experimental biofabrics [all spunbond nonwoven PLAs, but with different thickness and color (3M Co., Saint Paul, MN)], incorporated the mulch following the final cucumber harvest, collected soil samples with the same-sized soil core as Cowan et al. (2013) 9 months after incorporation, and measured the mass of recovered mulch fragments. Mulch recovery ranged from 5% to 55%, which was in contrast with the results of Cowan et al. (2013) and Li et al. (2014) where 125% and 100% of the initial amount of spunbond PLA were recovered 13 and 24 months after soil incorporation, respectively. This difference in mulch recovery could have been related to different spunbond PLA formulations used in the different studies, but also could be due to inaccuracy of the soil sampling method. Moreno et al. (2014) reported a method to determine the amount of residual mulch remaining at the end of the season using image analysis, but that study did not incorporate the mulch into the soil; mulch was measured on the soil surface only.
Organic and other growers concerned about environmental sustainability frequently are interested in knowing if BDM is indeed biodegrading fully after soil incorporation. Although laboratory tests can assess the potential of a mulch product to biodegrade under certain conditions (ASTM International, 2012), results may vary widely under field conditions as demonstrated by the studies cited previously. Because sampling errors often have been much greater than analytical errors for general soil sampling studies in the past, developing reliable soil sampling methods is essential (Webster and Oliver, 1990). Random soil sampling is suitable only in a highly homogenous field. A reliable and efficient soil sampling protocol is needed that enables growers and agricultural professionals to estimate mulch biodegradation after soil incorporation.
The specific objectives of this study were to 1) compare three methods (graph paper, image, and weight) to measure the amount of mulch recovered in soil samples; 2) determine the distribution of mulch fragments in the plot after soil incorporation; and 3) calculate the number of soil samples needed per unit area to assess the amount of mulch remaining in the soil.
Anzalone, A., Cirujeda, A., Aibar, J., Pardo, G. & Zaragoza, C. 2010 Effect of biodegradable mulch materials on weed control in processing tomatoes Weed Technol. 24 369 377
ASTM International 2011 ASTM D883: International standard terminology relating to plastics. ASTM Intl., West Conshohocken, PA
ASTM International 2012 ASTM D5988-12: Standard test method for determining aerobic biodegradation of plastic materials in soil. ASTM Intl., West Conshohocken, PA
Briassoulis, D., Babou, E., Hiskakis, M. & Kyrikou, I. 2015 Analysis of long-term degradation behaviour of polyethylene mulching films with pro-oxidants under real cultivation and soil burial conditions Environ. Sci. Pollut. Res. 22 2584 2598
Calmon, A., Guillaume, S., Bellon-Maurel, V., Feuilloley, P. & Silvestre, F. 1999 Evaluation of material biodegradability in real conditions – Development of a burial test and an analysis methodology based on numerical vision J. Environ. Polym. Degrad. 7 157 166
Cowan, J.S., Inglis, D.A. & Miles, C.A. 2013 Deterioration of three potentially biodegradable plastic mulches before and after soil incorporation in a broccoli field production system in northwestern Washington HortTechnology 23 849 858
Cowan, J.S., Miles, C.A., Andrews, P.K. & Inglis, D.A. 2014 Biodegradable mulch performed comparably to polyethylene in high tunnel tomato (Solanum lycopersicum L.) production J. Sci. Food Agr. 94 1854 1864
Dümichen, E., Barthel, A., Braun, U., Bannick, C.G., Brand, K., Jekel, M. & Senz, R. 2015 Analysis of polyethylene microplastics in environmental samples, using a thermal decomposition method Water Res. 85 451 457
Eubeler, J.P., Zok, S., Bernhard, M. & Knepper, T.P. 2009 Environmental biodegradation of synthetic polymers I. Test methodologies and procedures Trends Analyt. Chem. 28 1057 1072
Goldberger, J.R., Jones, R.E., Miles, C.A., Wallace, R.W. & Inglis, D.A. 2015 Barriers and bridges to the adoption of biodegradable plastic mulches for US specialty crop production Renew. Agr. Food Syst. 30 143 153
Hablot, E., Dharmalingam, S., Hayes, D.G., Wadsworth, L.C., Blazy, C. & Narayan, R. 2014 Effect of simulated weathering on physicochemical properties and inherent biodegradation of PLA/PHA nonwoven mulches J. Polym. Environ. 22 417 429
Hayes, D., Wadsworth, L., Sintim, H., Flury, M., English, M., Schaeffer, S. & Saxton, A. 2017 Effect of diverse weathering conditions on the physicochemical properties of biodegradable plastic mulches Polym. Test. 62 454 467
Jenni, S., Brault, D. & Stewart, K.A. 2007 Degradable mulch as an alternative for weed control in lettuce produced on organic soils Acta Hort. 638 111 118
Kasirajan, S. & Ngouajio, M. 2012 Polyethylene and biodegradable mulches for agricultural applications: A review Agron. Sustain. Dev. 32 501 529
Kijchavengkul, T., Auras, R., Rubino, M., Ngouajio, M. & Fernandez, R.T. 2008 Assessment of aliphatic–aromatic copolyester biodegradable mulch films. Part I: Field study Chemosphere 71 942 953
Krzan, A., Hemjinda, S., Miertus, S., Corti, A. & Chiellini, E. 2006 Standardization and certification in the area of environmentally degradable plastics Polym. Degrad. Stabil. 91 2819 2833
Li, C., Moore-Kucera, J., Miles, C., Leonas, K., Lee, J., Corbin, A. & Inglis, D. 2014 Degradation of potentially biodegradable plastic mulch films at three diverse U.S. locations Agroecol. Sustain. Food Syst. 38 861 889
Li, W.C., Tse, H.F. & Fok, L. 2016 Plastic waste in the marine environment: A review of sources, occurrence and effects Sci. Total Environ. 566 333 349
Liu, E.K., He, W.Q. & Yan, C.R. 2014 ‘White revolution’ to ‘white pollution’ - Agricultural plastic film mulch in China Environ. Res. Lett. 9 091001
Lucas, N., Bienaime, C., Belloy, C., Queneudec, M., Silvestre, F. & Nava-Saucedo, J.E. 2008 Polymer biodegradation: Mechanisms and estimation techniques - A review Chemosphere 73 429 442
Majewsky, M., Bitter, H., Eiche, E. & Horn, H. 2016 Determination of microplastic polyethylene (PE) and polypropylene (PP) in environmental samples using thermal analysis (TGA-DSC) Sci. Total Environ. 568 507 511
Markets and Markets 2012 Agricultural films market by applications and polymers - Global trends and forecasts to 2017. MarketsandMarkets Research Private, Maharashtra, India
Miles, C., Beus, C., Corbin, A., Wallace, R.W., Wszelaki, A.L., Saez, H., Walters, T., Leonas, K., Brodhagen, M., Hayes, D.G. & Inglis, D.A. 2009 Research and extension priorities to ensure adaptaion of high tunnels and biodegradable plastic mulch in the United Sates. Proc. 35th Natl. Agr. Plastics Congr. p. 102–108
Miles, C.A., DeVetter, L., Ghimire, S. & Hayes, D.G. 2017 Suitability of biodegradable plastic mulches for organic and sustainable agricultural production systems HortScience 52 10 15
Miles, C., Wallace, R., Wszelaki, A., Martin, J., Cowan, J., Walters, T. & Inglis, D. 2012 Deterioration of potentially biodegradable alternatives to black plastic mulch in three tomato production regions HortScience 47 1270 1277
Moreno, C., Mancebo, I., Tarquis, A.M. & Moreno, M.M. 2014 Univariate and multivariate analysis on processing tomato quality under different mulches Sci. Agr. 71 114 119
Moreno, M.M., Moreno, A. & Mancebo, I. 2009 Comparison of different mulch materials in a tomato (Solanum lycopersicum L.) crop Span. J. Agr. Res. 7 454 464
Ngouajio, M., Auras, R., Fernandez, R.T., Rubino, M., Counts, J.W. & Kijchavengkul, T. 2008 Field performance of aliphatic-aromatic copolyester biodegradable mulch films in a fresh market tomato production system HortTechnology 18 605 610
Rasband, W.S. 1997 ImageJ. 28 Mar. 2017. <http://rsb.info.nih.gov/ij>
Schonbeck, M.W. 1999 Weed suppression and labor costs associated with organic, plastic, and paper mulches in small-scale vegetable production J. Sustain. Agr. 13 13 33
Spaccini, R., Todisco, D., Drosos, M., Nebbioso, A. & Piccolo, A. 2016 Decomposition of bio-degradable plastic polymer in a real on-farm composting process Chem. Biol. Technol. 3 1 12
Steinmetz, Z., Wollmann, C., Schaefer, M., Buchmann, C., David, J., Troger, J., Munoz, K., Fror, O. & Schaumann, G.E. 2016 Plastic mulching in agriculture: Trading short-term agronomic benefits for long-term soil degradation Sci. Total Environ. 550 690 705
U.S. Department of Agriculture 1960 Soil survey: Skagit County. 5 June 2017. <https://www.nrcs.usda.gov/Internet/FSE_MANUSCRIPTS/washington/skagitWA1960/skagitWA1960.pdf>
U.S. Department of Agriculture 2006 Soil survey of Knox County, Tennessee. 5 June 2017. <https://www.nrcs.usda.gov/Internet/FSE_MANUSCRIPTS/tennessee/knoxTN2006/Knox_TN.pdf>
U.S. Department of Agriculture 2014 National organic standards (NOS) § 205.601(b)(2)(i–ii) synthetic substances allowed for use in organic crop production. U.S. Dept. Agr., Washington, D.C.
Van der Zee, M. 2011 Analytical methods for monitoring biodegradation processes of environmentally degradable polymers, p. 263–281. In: A. Lendlein and A. Sisson (eds.). Handbook of biodegradable polymers. Wiley-VCH, Weinheim, Germany
Weber, C.A. 2003 Biodegradable mulch films for weed suppression in the establishment year of matted-row strawberries HortTechnology 13 665 668
Webster, R. & Oliver, M.A. 1990 Statistical methods in soil and land resource survey. Oxford Univ. Press, Oxford, UK
Wortman, S.E., Kadoma, I. & Crandall, M.D. 2016 Biodegradable plastic and fabric mulch performance in field and high tunnel cucumber production HortTechnology 26 148 155
Yabannavar, A.V. & Bartha, R. 1994 Methods for assessment of biodegradability of plastic films in soil Appl. Environ. Microbiol. 60 3608 3614
Yamamoto-Tamura, K., Hiradate, S., Watanabe, T., Koitabashi, M., Sameshima-Yamashita, Y., Yarimizu, T. & Kitamoto, H. 2015 Contribution of soil esterase to biodegradation of aliphatic polyester agricultural mulch film in cultivated soils AMB Express 51 1 8