A Planting Template for Plug Flats

in HortTechnology
Author:
Charles W. Marr Proffessor. Department of Horticulture, Kansas State University, Manhattan, KS 66506

Search for other papers by Charles W. Marr in
ASHS
Google Scholar
PubMed
Close

Seedlings are established in small growing containers to reduce cost of greenhouse space, while improving crop uniformity. These seedlings often are referred to as plugs. Vacuum seeders are used by larger growers to seed many flats per season (Bakos, 1983); however, individual growers, producing plants for their own use, may not be able to justify expensive seeding equipment. Several moderately priced vacuum seeders are available (Bartok, 1988). They consist of a metal tray with small drilled holes to hold the seed in place when a vacuum is applied to the tray from an external source. However, several problems with them exist. Seeds must be free of extraneous materials that might clog the small holes. A slight jarring of the plate, especially when the plate is turned upside down over the seed flat, may cause seeds to dislodge, resulting in unplanted cells in each flat. Also, different sizes of seeds and flats require completely different seeding plates and plate holders. A small grower may choose to seed flats by hand by placing seeds individually in each cell. This is feasible only for large-sized seeds or with pelleted seed. A simple, inexpensive, non-vacuum alternative design is presented and evaluated.

  • Collapse
  • Expand