Helianthus verticillatus Small (whorled sunflower) is a federally endangered plant species found only in the southeastern United States that has potential horticultural value. Evidence suggests that H. verticillatus is self-incompatible and reliant on insect pollination for seed production. However, the identity of probable pollinators is unknown. Floral visitors were collected and identified during Sept. 2017 and Sept. 2018. Thirty-six species of visitors, including 25 hymenopterans, 7 dipterans, 2 lepidopterans, and 2 other insect species, were captured during 7 collection days at a site in Georgia (1 day) and 2 locations in Tennessee (6 days). Within a collection day (0745–1815 hr), there were either five or six discrete half-hour collection periods when insects were captured. Insect visitor activity peaked during the 1145–1215 and 1345–1415 hr periods, and activity was least during the 0745–0845 and 0945–1015 hr periods at all three locations. Visitors were identified by genus and/or species with morphological keys and sequences of the cox-1 mitochondrial gene. The most frequent visitors at all sites were Bombus spp. (bumblebees); Ceratina calcarata (a small carpenter bee species) and members of the halictid bee tribe Augochlorini were the second and third most common visitors at the two Tennessee locations. Helianthus pollen on visitors was identified by microscopic observations and via direct polymerase chain reaction of DNA using Helianthus-specific microsatellites primers. Pollen grains were collected from the most frequent visitors and Apis mellifera (honeybee) and counted using a hemocytometer. Based on the frequency of the insects collected across the three sites and on the mean number of pollen grains carried on the body of the insects, Bombus spp., Halictus ligatus (sweat bee), Agapostemon spp., and Lasioglossum/Dialictus spp., collectively, are the most probable primary pollinators of H. verticillatus.
Nicolas C. Strange, John K. Moulton, Ernest C. Bernard, William E. Klingeman III, Blair J. Sampson, and Robert N. Trigiano
Paweł Petelewicz, Paweł M. Orliński, Marco Schiavon, Manuel Mundo-Ocampo, J. Ole Becker, and James H. Baird
Golf courses in coastal regions of northern California are often faced with severe injury caused by pacific shoot-gall nematodes (Anguina pacificae) on their annual bluegrass (Poa annua) host in putting greens. For years, fenamiphos was used for mitigating disease outbreaks until its registration was withdrawn in 2008. An alternative product containing azadirachtin was intended for nematode suppression. Still, it required repeated applications throughout the year with questionable efficacy, making attempts to lessen the impact of the pathogen costly. This study evaluated fluopyram as a novel nematicide for control of pacific shoot-gall disease. Various application frequencies and rates were tested at several golf courses affected by the nematode. Results revealed that fluopyram applied once at 0.22 lb/acre reduced the number of new shoot-galls and improved annual bluegrass appearance for several months. Increased rates and application frequency occasionally improved the efficacy further. Although the visual quality of turf treated with this plant protection compound was tremendously enhanced, and the number of new shoot-galls was reduced, rarely a significant effect was observed on the population density of several soil-dwelling plant-parasitic nematodes, including pacific shoot-gall nematode. It is hypothesized that fluopyram did not move significantly past the thatch layer and into the soil. However, it effectively reduced the ability of pacific shoot-gall nematode juveniles to induce new shoot galls. Due to its long half-life, it likely protected against both new nematode infections and dissemination of pacific shoot-gall nematode when the shoot-galls decomposed.
The social media service Instagram is a popular public platform, but often underused tool to reach new demographics, reduce barriers, and perpetuate science-based information in extension. In the U.S. Intermountain West, Instagram was the top-rated platform for sharing information by predominantly new and female farmers. This article provides recommendations on key behaviors, goal setting, and quantifying impact on Instagram for extension programming. Accounts should target one niche or market, a consistent and personal voice, and regular communication (new content at least three times weekly). Unique and productive connections between extension personnel, community leaders, farmers, students, and public influencers expands programming. Tracking program accounts, including the number of followers and engagement rates, can assess program impacts and target market needs.
Jiffinvir Khosa, Derek Hunsaker, and Michael J. Havey
The amounts and types of epicuticular waxes on onion (Allium cepa) leaves affect feeding damage by onion thrips (Thrips tabaci). This study used gas chromatography mass spectrometry (GCMS) to establish the identities of waxes and measure over time wax amounts on leaves of inbred onion plants with glossy, semiglossy, and waxy foliage. Nine waxes were detected on leaves of all inbreds, and higher coefficients of variation (cv) were observed for less abundant waxes on foliage of doubled haploid onions. Older leaves had higher amounts of waxes compared with younger leaves on the same plant. Except for one minor wax, amounts of individual waxes on leaves were not significantly different for plants of different ages. There was a significant inbred by sampling date interaction due to lower amounts of waxes on the leaves of older plants from the semiglossy inbred. These results indicate that there is little advantage to multiple samplings of leaves over time from the same plant and resources may be better used to evaluate more plants. The relatively large cvs for amounts of specific waxes may reduce response to selection for unique epicuticular wax profiles to develop onion populations that suffer less feeding damage by onion thrips.
Ying Wang, Tingting Xue, Xing Han, Lingxiao Guan, Liang Zhang, Hua Wang, and Hua Li
Kaolin particle film (KPF) is an aqueous formulation of chemically inert mineral particles that can be sprayed on the surface of crops to form a protective film, resulting in increased fruit yield and quality. In this work, the effects of kaolin-based, foliar reflectant particle film on grape composition and volatile compounds in ‘Meili’ (Vitis vinifera L.) grapes were investigated under different growth stages over two growing seasons. The 100-berry weight and titratable acid content were decreased, and the sugar and soluble solid contents were increased in grapes of plants treated with kaolin over 2 years. Compared with grapes from plants not sprayed with kaolin, the levels of total phenol, flavonoid, flavanol, tannin, and anthocyanins of grapes from plants treated with kaolin for 2 years were mostly increased. High-performance liquid chromatography (HPLC) analysis also revealed an increased content of monomeric anthocyanin and changed anthocyanin composition. However, there was little effect on the volatile compounds in the grapes. These results demonstrate that KPF can facilitate the accumulation of sugar and phenolics, thereby improving grape quality even in a humid climate.
Alexander Miller, Petrus Langenhoven, and Krishna Nemali
Operational cost of producing lettuce (Lactuca sativa) during the winter in greenhouses is high in the northern regions of the United States due to the addition of supplemental lighting (SL) and heating. Crop productivity in greenhouses should increase to offset high operational costs and maintain profits. Factors including SL composition, heating efficiency, suitability of production systems (PS), and cultivar performance can affect crop productivity. Research-based information on optimizing the above environmental- and production-related factors is limited. This information is critical for growers to make informed decisions and increase profits during winter hydroponic production. We evaluated the interactive effects of SL composition, solution temperature, PS, and cultivar treatments on lettuce shoot dry weight (SDW, g·m−2) and shoot water content (SWC, %) in a greenhouse maintained at suboptimal air temperature (13.7 °C) using a split-plot design. There were three light treatments (sunlight without SL, sunlight + narrow-spectrum SL at nighttime, and sunlight + full-spectrum SL at nighttime), two solution temperature levels [heated (18.8 °C) and unheated (13.2 °C)], two hydroponic PS [constant flood technique (CFT) and nutrient film technique (NFT)], and eight cultivars included in the study. Results indicated that 1) a narrow-spectrum SL at nighttime in combination with heated solution resulted in maximum SDW of lettuce, 2) the SDW and SWC (major determinant of economic yield) increase between the heated and unheated solution temperature treatments was higher in the CFT than in the NFT, and 3) the positive effects of using heated solution were seen mainly in the green-color cultivars. Our research identified the optimal spectral composition of nighttime SL, tested the positive effects of alternate heating methods using heated solution on plant growth under suboptimal air temperature conditions, compared the suitability of two hydroponic PS for lettuce production, and quantified yield potential of several lettuce cultivars in hydroponic production during winter. Growers can use our research findings to make informed decisions about their investment and to maximize hydroponic lettuce productivity and profits during winter.
Coral Ortiz, Antonio Torregrosa, Enrique Ortí, and Sebastià Balasch
Thinning is the process of removing some flowers or fruit to increase fruit size at harvest. In the Valencia region of Spain, the thinning operation for citrus fruit (Citreae) is performed for some mandarin varieties. This is always performed manually; however, this method is very expensive. The goal of this research study was to assess the mechanical thinning of mandarin (Citrus reticulata) using a hand-held branch shaker. Different thinning treatments were conducted over a 3-year period. The gasoline-powered branch shaker was capable of detaching fruit four- to five-times faster than manual thinning. Final fruit size was significantly higher using manual and mechanical thinning compared with a no thinning treatment. Similar final fruit size was obtained with manual and mechanical thinning. However, no significant differences were found in final fruit yield by weight among no thinning, mechanical thinning, and manual thinning treatments. The use of a branch shaker could be recommended for thinning operations to increase efficiency, reduce labor costs, and obtain larger and higher-quality fruit.
James A. Schrader, Paul A. Domoto, Gail R. Nonnecke, and Diana R. Cochran
An accurate predictive model for estimating the timing of seasonal phenological stages of grape (Vitis L.) would be a valuable tool for crop management. Currently the most used index for predicting the phenological timing of fruit crops is growing degree days (GDD), but the predictive accuracy of the GDD index varies from season-to-season and is considered unsatisfactory for grapevines grown in the midwestern United States. We used the methods of multiple regression to analyze and model the effects of multiple factors on the number of days remaining until each of four phenological stages (budbreak, bloom, veraison, and harvest maturity) for five cold-climate wine grape cultivars (Frontenac, La Crescent, Marquette, Petit Ami, and St. Croix) grown in central Iowa. The factors (predictor variables) evaluated in models included cultivar, numerical day of the year (DOY), DOY of soil thaw or the previous phenological stage, photoperiod, GDD with a base temperature of 10 °C (GDD 10), soil degree days with a base temperature of 5 °C (SDD 5), and solar accumulation. Models were evaluated for predictive accuracy and goodness of fit by calculating the coefficient of determination (R 2), the corrected Akaike information criterion (AICc), and the Bayesian information criterion (BIC); testing for normal distribution of residuals; and comparing the actual number of days remaining until a phenological stage with the number of days predicted by models. The top-performing models from the training set were also tested for predictive accuracy on a validation dataset (a set of data not used to build the model), which consisted of environmental and phenological data recorded for one popular Midwest cultivar (Marquette) in 2019. At all four phenological stages, inclusion of multiple factors (cultivar and four to six additional factors) resulted in predictive models that were more accurate and consistent than models using cultivar and GDD 10 alone. Multifactor models generated from data of all five cultivars had high R 2 values of 0.996, 0.985, 0.985, and 0.869 for budbreak, bloom, veraison, and harvest, respectively, whereas R 2 values for models using only cultivar and GDD 10 were substantially lower (0.787, 0.904, 0.960, and 0.828, respectively). The average errors (differences from actual) for the top multifactor models were 0.70, 0.84, 1.77, and 3.80 days for budbreak, bloom, veraison, and harvest, respectively, and average errors for models that included only cultivar and GDD 10 were much larger (5.27, 2.24, 2.79, and 4.29 days, respectively). In the validation tests, average errors for budbreak, bloom, veraison, and harvest were 1.92, 1.31, 0.94, and 1.67 days, respectively, for the top multifactor models and 10.05, 2.54, 4.23, and 4.96 days, respectively, for models that included cultivar and GDD 10 only. Our results demonstrate the improved accuracy and utility of multifactor models for predicting the timing of phenological stages of cold-climate grape cultivars in the midwestern United States. Used together in succession, the models for budbreak, bloom, veraison, and harvest form a four-stage, multifactor calculator for improved prediction of phenological timing. Multifactor models of this type could be tailored for specific cultivars and growing regions to provide the most accurate predictions possible.
Yingchao Lin, Dejun Kong, Zhihong Wang, Yi Chen, Zhixiao Yang, Chun Wu, Hui Yang, and Lili Chen
Tobacco is traditionally an industrial crop that is used for manufacturing cigarettes. However, due to health concerns and global tobacco control movements, alternative uses of tobacco are urgently needed to support tobacco farmers and vendors. Tobacco is also an oilseed crop with an oil yield ranging from 30% to 40 of its dry weight. However, there is still no information on the effects of nitrogen application on tobacco seed yield and seed oil production. The objective of this study was to evaluate the effects of N fertilization (90, 120, 150, and 180 kg·ha−1 N) on the seed yield, oil content, fatty acid composition, and seed germination characteristics of tobacco plants at two locations. The results showed that applying increasing amounts of N to tobacco plants significantly increased their total seed yields and oil content. Nitrogen application also modified the fatty acid composition of the seed oil, as more unsaturated fatty acids were produced under the increasing N application rate treatments than under the control. Moreover, increasing the N application rate generally significantly increased the yields of individual fatty acids as well. Nevertheless, the increased seed oil content and altered fatty acid composition did not affect seed germination traits, as the seed germination potential and rate showed no obvious change among treatments or the control. The height and size of the tobacco plants also increased with the increasing N application rate, which would be beneficial for increasing biomass production for bioenergy. This study shows for the first time the feasibility of increasing the seed and oil yields and modifying the fatty acid composition of tobacco plants by increasing N addition.