Browse

Little is known about the adaptability of lychee (Litchi chinensis) to acidic soils high in aluminum (Al). A 2-year greenhouse study was conducted to determine the effects of various levels of soil Al on dry matter production, plant growth, and nutrient concentration in shoots of lychee cultivar rootstock seedlings (maternal half-sibs) of cultivars Brewster, Bostworth-3 (Kwai May Pink), and Kaimana. Soil Al treatments were statistically different for all variables measured in the study but not rootstock seedlings. Total leaf, stem, and root dry weights significantly decreased at soil Al concentrations ranging from 0.42 to 12.69 cmol·kg⁻¹. Increments in soil Al resulted in a significant reduction in the concentration of leaf calcium and phosphorus and a significant increase in leaf Al in cultivar rootstock seedlings. The concentration of leaf potassium, magnesium, iron, zinc, and boron were in the optimum range for lychee, whereas leaf nitrogen and manganese concentrations were above optimum. The results of this study demonstrated no cultivar rootstock seedlings differences for dry matter production in lychee trees grown under Al stress and demonstrate that lychee is highly susceptible to acid soils.

Pennsylvania bittercress (Cardamine pensylvanica) and other bittercress (Cardamine) species are among the most common and difficult-to-control weed species in container nurseries, and they have been vouched in most counties in Florida. Preemergence herbicides can provide control, but concerns over potential resistance development, environmental issues, and crop injury problems associated with herbicide use create the need for alternative weed control methods to be explored. Previous studies have shown the potential of mulch materials for controlling weeds in nurseries, but their use along with preemergence herbicides has not been extensively investigated. To compare the effects of different mulch materials and herbicides on Pennsylvania bittercress control, a full factorial designed greenhouse study was conducted. Three mulch treatments including no mulch, pine (Pinus sp.) bark, and rice (Oryza sativa) hulls were evaluated with three herbicide treatments, including water (i.e., no herbicide), isoxaben, and prodiamine applied at label rates. Twenty-five seeds of Pennsylvania bittercress were sown on the surface of each container and emergence (percent), coverage (square centimeters), seedhead number, and biomass (grams) were measured. The results showed that Pennsylvania bittercress in containers mulched with rice hulls had the lowest emergence throughout the experiment. For coverage, seedhead, and biomass parameters, Pennsylvania bittercress seeded in rice hulls treatments had significantly lower coverage, fewer seedheads, and lower biomass compared with those in nonmulched or pine bark treatments, regardless of herbicide treatment. With isoxaben and the water check, nonmulched treatments had the highest coverage/seedhead/biomass, whereas with prodiamine, Pennsylvania bittercress in pine bark mulched containers had the highest coverage/seedhead/biomass. In conclusion, applying rice hulls alone can provide better Pennsylvania bittercress control compared with isoxaben or prodiamine applied alone.

Growers have different capabilities to alleviate salt stress in the growing substrate. One method to reduce substrate salt levels is to increase the volume of water applied during irrigation. This increases the leaching fraction (LF) which is the volume of water that drains from the growing substrate divided by the volume applied during irrigation. We can determine the leaching requirement (the minimum LF to maintain a desired substrate salt level) using the formula LF = EC_w/5(EC_e − EC_w), where EC_w is the electrical conductivity (EC) of the water and EC_e is the desired EC of the substrate. We tested this formula to see if we could maintain an acceptable substrate EC of 4 dS⋅m⁻¹ by modifying the LF for ‘Hope’ philodendron (Philodendron selloum) and ‘Tineke’ ficus (Ficus elastica) irrigated with tap water (EC 0.17 dS⋅m⁻¹) or reclaimed wastewater (RWW) from Davie, FL, USA (EC 1.66 dS⋅m⁻¹) and RWW from Hollywood, FL, USA (EC 2.93 dS⋅m⁻¹). Shoot and root dry weight was greatest for both species with the tap water applied with a 5% LF. Increasing the LF to 15% for Davie RWW and a 55% for Hollywood RWW, produced acceptable growth for ‘Hope’ philodendron and ‘Tineke’ ficus. In our second experiment, we monitored the growth of ‘Looking Glass’ begonia (Begonia fibrous), ‘Freddie’ calathea (Calathea concinna), and ‘Déjà vu’ philodendron (Philodendron selloum) irrigated with tap water (EC 0.15 dS⋅m⁻¹), salt water (EC 3.49 dS⋅m⁻¹), or RWW (EC 3.48 dS⋅m⁻¹) with LFs of 28%, 50%, or 65%. ‘Looking Glass’ begonia and ‘Freddie’ calathea growth was greater with 65% LF than 28% LF, respectively, for all three water sources. Philodendron growth was not different due to LF. However, philodendron, calathea, and begonia growth was greater with tap water and RWW than with saltwater. Although final leachate EC with saltwater and RWW was around 2 dS⋅m⁻¹ using 50% LF, leachate sodium (Na) levels from salt watered plants was higher than for RWW or tap watered plants. We suspect that high Na levels in combination with lower potassium (K) and calcium (Ca) levels in the saltwater solution resulted in poor plant growth. Although the Na levels in leachate from RWW substrates was higher than tap watered substrates, Ca and K levels also were greater. Although we were able to use the salt equation to maintain substrate EC levels ranging from 2 to 4 dS⋅m⁻¹, volumes of solution applied were two to three times higher when using RWW or salt water compared with tap water. We suspect that a balance between Na, Ca, and K supported better plant growth with RWW than salt water. However, additional work needs to be done on the benefits of supplemental Ca and K when using water high in salts or Na. This works suggests that in addition to monitoring EC, it also is important to monitor Na, Ca, and K concentrations.

Fruit zone leaf removal effects on grapevine (Vitis sp.) productivity and fruit quality have been widely researched. Many fruit zone leaf removal studies state that grape temperature influences grape composition; however, few studies have quantified grape berry temperature fluctuations over time, likely because of technical challenges. An efficient, simple, and economical way to estimate grape berry temperature would be valuable for researchers and industry. Consistent quantification of grape temperature would allow researchers to compare the effects of leaf removal on grape composition across varying climates and regions. A cost-effective means to quantify berry temperature would also provide industry members site-specific information on berry temperature patterns and guide leaf removal practice. Our goals were to develop a method and model to estimate berry temperature based on air temperature and berry mimics, thereby precluding the need to measure solar radiation or obtain expensive equipment. We evaluated the ability of wireless temperature sensors, submerged in various volumes of water within black or white balloons, to predict berry temperature. Treatments included 0-, 10-, 30-, 50-, and 70-mL volumes of deionized water in black and white balloons and a clear plastic bag with no water. Regression analysis was used to determine the relationship between sensor-logged temperatures and ‘Camminare noir’ berry temperatures recorded with hypodermic thermocouples. Nighttime berry temperatures were close to air temperature in all treatments. Using a piecewise regression model, the 30-mL white- and 30-mL black-balloon treatments predicted berry temperature with the greatest accuracy (R ² = 0.98 and 0.96, respectively). However, during daytime hours only, the 30-mL white-balloon treatment (R ² = 0.91) was more effective at estimating temperature than the 30-mL black-balloon treatment (R ² = 0.78). Housing temperature sensors in balloons proved to be an accurate, practical, and cost-effective solution to estimate berry temperature. Further refinement of this method in different regions, row orientations, training systems, and cultivars is necessary to determine applicability of this approach under a wide range of conditions.

Locally produced strawberries (Fragaria ×ananassa) have outstanding market potential. But strawberry production has been decreasing in the north-central United States, partly because of high production risks associated with the traditional matted-row system. The annual plasticulture system attracts attention but its low yield limits the wide adoption of the production system in the north-central United States. High tunnels are widely used to extend strawberry seasons worldwide, but the system was not fully explored in the United States. Although the benefits of growing strawberries in high tunnels were recognized, information on suitable strawberry cultivars specific for the fall-planted high tunnel production system is limited. A wide range of short-day and day-neutral strawberry cultivars, including recently released cultivars, were evaluated in the fall-planted annual plasticulture high tunnel systems for three seasons. Averaged among cultivars, the marketable yields were 1.96, 1.35, and 2.27 lb/plant for 2015–16, 2019–20, and 2020–21 seasons, respectively. The combined use of high tunnels and floating rowcovers created favorable microclimate conditions that led to high yields. Florida Radiance, San Andreas, Chandler, and Rocco were the top-yielding cultivars. Besides Chandler, the other top-yielding cultivars entered peak harvest in the second half of April. Harvests ended at the end of May or early June. All cultivars reached the US Department of Agriculture standard for total soluble solids in all three seasons, although Camino Real, FL Radiance, and Sweet Sensation consistently had relatively lower sugar content. Considering a warm-season crop could grow in high tunnels before or after strawberry, a diversified cropping system involving strawberry and other vegetables is highly valuable for high tunnel production systems in the north-central United States. This study did not compare cultivars’ resistance to diseases, but it should be a critical factor in selecting cultivars. Future studies are also warranted to evaluate the effects of incorporating soil treatments and cover cropping for suppressing diseases in the soil-based high tunnel system. Sustainable management strategies to control two-spotted spider mites (Tetranychus urticae) are also crucial in successfully using the system in the north-central United States.

High-resolution scans of plant cuttings were made for a plant identification course to create additional study resources. Stems, flowers, leaves, and other parts with identifiable features were cut and placed on a high-quality flatbed scanner. A framework suspended a black background cloth above the cuttings to create a dark scanning environment, and it was placed far enough away from the scanner glass so as not to appear in the scanned image. Botanical scans can be shared, manipulated, composed, and otherwise provided to students for study materials. Scans are complementary to other common study aids such as pressed herbarium samples or photography.

Recent advances in irrigation technologies have led many states to incentivize homeowners to purchase United States Environmental Protection Agency WaterSense-labeled, smart irrigation controllers. However, previous research of smart controllers has shown that their use may still result in excess water application when compared with controllers manually programmed to replace actual water loss. This study compared kentucky bluegrass (Poa pratensis) irrigation applications using three smart irrigation controllers, a conventional irrigation controller programmed according to Cooperative Extension recommendations, and the average irrigation rate of area homeowners in Utah during 2018 and 2019. Of all the controllers tested, the manually programmed controller applied water at amounts closest to the actual evapotranspiration rates; however, smart controllers applied from 30% to 63% less water than area homeowners, depending on the controller and year of the study. Kentucky bluegrass health and quality indicators—percent green cover and normalized difference vegetation indices—varied between years of the study and were lower than acceptable levels on several occasions in 2019 for three of the four controllers tested. Compared with the results of similar studies, these findings suggest that the effects of smart irrigation controllers on turfgrass health and quality may vary by location and over time.

With the phase-out of methyl bromide because of its impact on ozone depletion and the shift to a more protected culture system in organic vegetable production, grafting practice has gained greater attention in the United States because it may be considered a viable disease control method in organic vegetable production. However, there is a lack of information on the economic feasibility of using grafting in organic tomato (Solanum lycopersicum) production in a protected culture system such as a high-tunnel system. Using 2-year on-station trial data collected in Citra, FL, we examined the effect of using grafting on the economic returns of organic tomato production in high tunnels. Our analysis suggests that grafting tends to increase the marketable yield of organic tomato production in high tunnels. However, the enhanced yield does not necessarily increase the net return, depending on market conditions and the relative performance of grafted transplants. In addition, our results indicate that the net return of grafted production is highly sensitive to the tomato selling price. Obtaining a price premium is essential for increasing the profitability of grafted organic tomato production in high tunnels.

Domestic production of ginger (Zingiber officinale) and turmeric (Curcuma longa) rhizomes is increasing. The objective of this study was to compare growth and rhizome yield of these crops using different container volumes and planting densities. Two greenhouse experiments that lasted 28 weeks each were conducted. In Expt. I, one sprouted rhizome of a single ginger variety (Bubba Blue) and four turmeric varieties (Hawaiian Red, BKK, White Mango, and Black) were transplanted into either small (1.5 gal) or large (13.3 gal) round containers. In Expt. II, either one or three sprouted rhizomes of two ginger varieties (Bubba Blue and Madonna) and two turmeric varieties (Indira Yellow and Hawaiian Red) were transplanted into either large (13.3 gal) or medium (3.9 gal) round containers. In Expt. I, there were an increase in plant growth and yield with increasing container volume, as both crops produced more than double the shoot, root, and rhizome fresh weight (FW) when grown in large compared with small containers. In Expt. II, rhizome yield of ginger was 44% higher in medium than large containers, and container volume did not affect yield in turmeric. Total dry weight (DW) was higher in plants grown in the larger container volume in both species in Expt. I, and turmeric only in Expt. II. However, ginger in Expt. II had an 18% higher plant DW in the medium compared with the large container. The higher density in Expt. II increased yield and biomass production per container compared with the lower density, regardless of variety and container volume. Overall, net revenue per container was higher in Expt. II than Expt. I because of the higher rhizome yield. In Expt. I, the higher yield of ginger compared with turmeric increased sales revenue of this species, despite a lower sales price per kilogram. In contrast, the higher yield of turmeric in Expt. II resulted in higher sales revenue and net revenue per container compared with ginger. Based on our results, medium containers could be used to minimize material and space costs for ginger and turmeric production under the conditions evaluated in our study.